To order, give as a call at 815-963-1005 (evenings), or email us at firstname.lastname@example.org.
You can also download this handy form, (PDF file, Adobe Acrobat required) fill it in and fax it back to us at: 815-962-6876
Please have as much of the following ready as you can - if your not sure - of what you need - no problem! We'll walk you through it one step at a time!
- For Switch Panel Layout we need to know how many switches you will need 5-6-8-10 and what the switches will operate (what relay they will turn on and off in the car).
- For interface layout we need to know if you will need switch inputs like, line lock button, brake lights switch, or any switch input to activate a relay output. We can also supply power output to activate nitrous arm, nitrous line purge, turn lights, or any switch out (activate relays only)
- Relay output units can be mounted anywhere. Most of the time we have 1 under hood (motor) 1 under dash (dash) and 1 in the trunk (trunk). On a Pro Car both mount under dash and wired to under hood. We need to know the mounting location like fuel pump, inter-cooler pump and where they will be mounted so we can put power outputs in the location where it will be wired.
- Layout below shows how a turbo or blower car can be wired using 8 bay switch panel a three relay power units, Neutral safety switch input and bump start button input cables are suppled. If you can show all the components you will be using I can layout the system and fax you back the car layout. After you see layout you can call on the phone and let me now if it's every thing that you will need for your car.